Arduino LED: LDR and LED Arduino, Указатель поворотов на arduino led matrix ht1632c, WS2811 Arduino led matrix test, Arduino NANO. LED cube 4x4x4 (MP1051 from


...
Arduino LED

Указатель поворотов, габаритов, стоп собранный на arduino и led matrix ht1632c. Пока без корпуса на столе.
Будет использоваться на моём велосипеде.
При нажатии одной из двух кнопок на руле будет отображаться соответствующий указатель поворота.
При нажатии одновременно двух кнопок будет отображаться сигнал "Спасибо".
При нажатии тормоза будет загораться тормоз.
Если не нажата никакая кнопка или тормоз будут отображаться габариты.
Основная часть будет съёмной.
В ней уже есть акб. Хватает примерно на месяц. заряжается от USB.
Также есть второй USBразъём для подключения к компу для изменения программы.
Размеры пока такие(буду уменьшать толщину): высота 10см, ширина 12см, толщина 2см.
К основной части подключается кабель с помощью sata разъемов который будет идти не руль.
Там будет ещё одна коробочка но совсем маленькая. В ней будут разветвляться провода на кнопки и передние фонари. (на видео вместо них два пока постоянно горящих светодиода).
Провода и маленькая коробочка сниматься не будут.
First test with an arduino nano and a ws2811 led strip matrix
Project Copyleft! Arduino NANO, LED cube 4x4x4

Первая рабочая версия удаленного управления микроконтроллером по сети интернет.
музыка лишняя - при съемке забыл выключить и при редактировании видео забыл вырезать звук
Проба пера на ардуино мега.
P.S крайняя кнопка включает рандомный диод.
Мои издевательства над Arduino) Пародия на цветомузыку)
This is my latest project,completly handmade.

Discover how to make your own at :
http://badwolf.hackhut.com/2012/02/19/led-water-wall-ambient-light/

Simple facial expressions for use in my interactive robot projects. See more @ http://letsmakerobots.com/node/37367.

Бинарные часы на Arduino, и выходных сдвиговых регистрах 74HC595 + LED

http://apecoder.ru/
Imperial March for Arduino UNO + RGB LED diod
Arduino 7segment LED общий катод
arduino_voltmetr_7_segmen_LED
Штатива нет, простите за тряску.
sketch - https://yadi.sk/d/M06zTgDss2v6q
My telegram bot controlling two LEDs and a MAX7219 8x8 LED matrix.
I send the commands /ledr or /ledg for red or green LED, or /smile and /frown for smiley/frowny faces.

The bot is run on Node.JS using packages telebotframework and johnny-five.
Code: http://pastebin.com/SZaWSGEK
https://vk.com/arduino_group

Fading 20 LEDs by software-PWM.
MadMapper with LED output through an Arduino compatible device (Teensy 3.1). LEDs are 7 meters APA 102 (7*60=420 LEDs with 3 channels per LED). It could be any digital LED strip compatible with FastLED (ie ws2811 & ws2812). More info and arduino source here: http://forum.garagecube.com/download/file.php?id=214
This is a video for an Arduino RGB LED Programmed Christmas Tree. Check out the instructable at:

http://www.instructables.com/id/Arduino-Controlled-Positional-RGB-LED-Christmas-Tr/
https://vk.com/arduino_group

Using LEDs to sense light as well as generate it. Using an Arduino and Processing.
arduino flash led
Push LED Power Switch by Arduino Uno
сперва загораются габаритные огни.
затем включается на время и выключается дальний свет.
потом пару раз моргают стоп-сигналы...левый не рабочий :(
http://www.tmatthew.net/blog/breathing_led Fading LED's are usually pretty simple, but the real wow factor happens when the LED isn't just fading, it's breathing. Apple did this on their MacBook as a sleep mode indicator, and the visual effect really makes it seem alive. In this video the Arduino is first programmed with the fading code, then reprogrammed with the breathing code.
8 X 8 WS2811 led matrix controlled by an Arduino Nano V3.0 board, wireless control is made with a HC-06 Wireless Bluetooth Transeiver and an Android app made with Appinventor.
The fire animation is based on Gilad Dayagi code for rainbowduino, modified to work with the WS2811 LED strip.
6/21/2013 - Completed and installed in coffee table: http://youtu.be/OLfF4b49MLs & http://youtu.be/xkohbr9ApMo
6/19/2013 - Duplicated and De-bugged: http://youtu.be/ZO-9DszzpI8

Portion of a larger project. In-depth instructions upcoming. Also, this is a preliminary video uploaded by request. Some minor flaws (see: wiring error causing always-on LED node) are existant. To be fixed in the next few weeks.

Inspired by http://youtu.be/IkmpIXd9Q90 & http://youtu.be/Y3ulBf7NIl8
I desired a vers
помигать светодиодами - святое
Первые опыты с Arduino
I am testing out WS2812b LED light stripe with FastLED library and Arduino Mini Pro. With only single data pin, you are able to control so many LEDs! Cool!

If you are interested, I have step by step tutorial at my blog here:
http://stonez56.blogspot.tw
яркость светодиодов энкодером.
в дальнейшем управление яркостью ламп
Arduino ping-pong game.
More info http://surovtsev-as.ru/post/84029065659/arduinopong
Borland Builder C++ y Arduino
Comunicacion Serial
Ejemplo: Led On-Off
Descargar Programa y Codigo: https://www.dropbox.com/s/vf6xh89iixyg238/Comunicacion%20Serial%20con%20Arduino%20y%20Borland%20Builder%20C%2B%2B%20%5BLed%20On-Off%5D.rar
Arduino + Led v1. Программирование микроконтроллера для управления светодиодом.

Классика программирования микроконтроллера - управление напряжением светодиода
VU Meter на ATtiny85

Небольшой Arduino проект. Для проекта нужно: семисегментный светодиодный индикатор, потенциометр. Индикатор будет управляться потенциометром.

Программа (.ino) - https://yadi.sk/d/blYsb47tdsbrY
Схема (.png) - https://yadi.sk/i/u_l9TZAldsbrg
Немного о семисегментном светодиодном индикаторе - https://yadi.sk/i/HvdJ25gPdsbs9
Красивый декор для дома

Что можно сделать что бы снизить тепловыделение и продлить срок службы светодиодной ленты.

Вы можете купить на Aliexpres(You can buy on Aliexpress):

ESP8266 ESP-13 https://goo.gl/OYrZqG
ESP8266 ESP-201+IPX https://goo.gl/DntLtV
ESP8266 ESP-01 http://goo.gl/QWnMm1
ESP8266 ESP-12 https://goo.gl/UR92Ri
ESP8266 ESP-05 https://goo.gl/8JkSPS
ESP-07 версия NodeMcu Lua https://goo.gl/l3si4m
ESP8266 НС-22 https://goo.gl/Y7djXK

TFT LCD 7" 800x480 https://goo.gl/bbp4kV
TFT LCD 3.2" 320 * 240 https://goo.gl/UOobQr
'Like' QUBE LED on Facebook! http://www.facebook.com/QUBELED
Visit http://www.qubeled.com for more details.
Click my YouTube Channel link directly above, to view other 3D Products!

16x16x16 pixels, can show dynamic English letters, and the effects of starry sky, firework, animal and plant etc.

Visible side: 5 sides (top,left right,front back)
Pixels qty: 16*16*16=4096
code is on my other channel: https://www.youtube.com/watch?v=0PgFK85fIHM

:)

UPDATE: Here is the code. I've been really busy and I don't know when I'm going to have time to put together some more information. Instructions for wiring the Arduino to the TLC5490's can be found in the TLC5490 Arduino library. Message me if you have individual questions until I get around to putting together something more substantial.
http://pastebin.com/iKP7GUbS

This is my homemade music visualizer. Audio is passed in through a normal 3.5mm stereo jack on the back and then sent to you
arduino and visual studio 2008

I built a lighthouse bookshelf for my little guy's nautical themed bedroom, and just had to make a fun, working, multifunction beacon for it. Blog Post: http://industriumvita.com/lighthouse-with-remote-controlled-led-beacon/
Часы на платформе arduino, показывают время, дату, температуру, влажность, давление, умеет показывать синусоиду аудио сигнала, реализован клеточный автомат. Код кому интересно: http://arduino.ru/forum/proekty/arduino-pt6961-led-matrix-watch
Check out the code on Github: https://github.com/denysvitali/MusicLeds

Enjoy
What I did here: I used an Arduino Uno and an ultrasonic / sonar sensor to test how it works. Using one red LED one green LED and a small buzzer / beeper I tried to figure if anything in 30 CM and 20 CM in front of the sensor comes. If anything in 30 CM to 20 CM comes in front of sensor it will give a low sound from buzzer and green LED will turn on. Anything come closer than 20 CM will turn the red LED on with higher sound.
What I used:
1 Arduino uno
1 Ultrasonic sensor - HC-SR04
1 Red Led
1 Green Led
1 Bu
I just bought a new Arduino Uno and i want to test it.
the IDE has a small LED blink code to upload on it, but that time i don't have a LED light to test, so i have attached a small fan to test it and run it.
This is a review of Chinese clone of the Arduino Mega 2560 Rev3 board. This video also deals with LED blink test as well as how to Reset the Arduino board.
Thanks for watching.
Arduino LED tower VU meter with few modes !!
If you want shematic you can just write comment.

I'm new on the You Tube , please Like(y) ,Share and Subscribe! ;)
And thanks for watching! ;)
Cветодиодный куб KIT LED CUBE 4x4x4 Nano от Мастер Кит

http://www.megachip.ru/item.php?item_id=4254243

Возникла необходимость удаленно управлять поворотами видео-камеры. На видео успешные результаты управления освещенностью светодиодов джойстиком по сети. Далее нужно светодиоды заменить моторчиками)
--------------------- http://vk.com/proteus789 -------------------------

--------------------- http://vk.com/freeduino ----------------------------
Моя первая поделка на ардуине.
Серва поворачивается на угол, установленный переменным резистором.
Диодная шкала показывает положение сервы.
Светодиодный светильник-конструктор. В этом видео показано несколько вариантов сборки светильника.
sketch - https://yadi.sk/d/zqK_IMKIs4hcm
Пока грузилось видео немного подправил скетч.
“#ардуино #arduino #ws2812 #ws2812b addressable RGB LEDs” http://instagram.com/p/yh49m5wHJa/
bboy_usyt's video on Instagram http://instagram.com/p/sajjafMvnF/
несколько вариаций мигания светодиодами, или по стопам китайцев.
--------------------- http://vk.com/proteus789 -------------------------

--------------------- http://vk.com/freeduino ----------------------------
С сегодняшнего дня начал эксперименты с arduino.
Проще говоря, ардуинка через ethernet шилд подписана на pub-sub MQTT сервер mosquitto контролируемый openHub, который и предоставляет web интерфейс и приложения для мобилок.
ROBOTICS

http://vk.com/homebrew_robotics_club
Parola is a modular scrolling text display using MAX7219/21 LED matrix display controllers. The display is made up of any number of identical modules that are plugged together to create a wider/longer display.
PLEASE NOTE: The site to visit is now http://parola.codeplex.com, not the site mentioned at the end of the video.

•Text left, right or center justification in the display
•Text scrolling, appearance and disappearance effects
•Control display parameters and animation speed
•Support for hardware SP
We use Atmel Studio 7 to program an Atmega328p on Arduino Uno Board

Led blinking project#1

https://www.facebook.com/BiotroniQ/
My first prototype with Arduino Uno - sound-and-light show. Please see this video on HD mode.
This is my huge RGB lamp, 95 led driven by Arduino (actually an atmega168)
It took a lot of time to solder and created everything!
Based on the project of D.Clausen from NYC Resistor

Music by
https://8bc.org/music/Deepearthvoid/Bacchus%27+Ill+Plates/ (Many thanks!)
Штатива нет, простите за тряску.
Open for details.

Our latest project : https://www.youtube.com/watch?v=sXsGklZT-80&feature=youtu.be

0:00 - 3:00 = Music connected
3:00 - 3:42 = Frequency generator connected
3:42 - 4:01 = Pictures
LED cube 3x3x3 built from 27 5mm fast flashing blue LEDs.
LED cube was connected to the Arduino Mega using only 12 pins to control 27 LED lights.
The final product will soldered to a PCB board using a ATMega chip to replace the Arduino.
Instructions on how to build the Cube are all over YouTube, I will post some links eventually.
Or make my own tutorial.

Code:
http://www.abrushfx.com/Arduino/ledcube3.html

Music: Kevin MacLeod

Completion of a project. Two 24" x 26" boards (pegboard) filled with 818 blue LEDs, 160 IR emitters, and 190 IR receivers. All organized into 190 "nodes" and powered by two Arduino micro-controllers. I built the coffee table and sized the inner cabinet to accommodate these pegboard reactive surfaces. The array of white lights that you see when there are no blue LEDs on are the infrared (IR) emitters. This portion of the light spectrum is invisible to the naked eye, but digital cameras can pick them up. Simp

https://www.arduino.cc/
https://github.com/esp8266/Arduino
http://www.blynk.cc/

I found Blynk somewhere in my Twitter feeds and it catches my curiosity. :D

The setup is quite simple:
All I need was an ESP8266 module, LED, and a WiFi connection.
I use a USB-TTL adapter to program the ESP12, Arduino Uno as my 3.3V power source and a power bank as my 5V source.

All of the wiring is on the github link above. For my case, i use GPIO14 to control the LED.

Arduino IDE was being used to upload the Blynk firmwar
More information is available at http://blog.makezine.com/archive/2009/02/howto_tuesday_arduino_101_blink_an_led.html

This week I am going to be starting a series about getting started with the Arduino. A few weeks ago I posted a quick how-to on using a force sensor and received a lot of positive feedback. This led me to the idea of a creating a series of how-to's about our favorite little micro-controller, the Arduino.

We have lots of Arduino's in the Maker Shed http://www.makershed.com/SearchResults.asp?Cat=43
This project was conceived 4 weeks ago yesterday. I finally feel like my Christmas project is ready to share. It's a 4.5' Christmas tree strung with 350 addressable LEDs run from an Arduino Uno (programmable microcontroller) with a Danger Shield (board that attaches to the Arduino with several controls). I wrote/borrowed/modified 11 different animations so far. I programmed the Danger Shield to allow for control of the mode as well as animation selection, speed and brightness. This video shows the demo mode
Turning on an LED with a button 4.
Oops! Again. LED is sometimes showing us strange.
I press the button but LED does not change state.
Why? Do you know why?

You can check the source code from this episode to my website and Facebook.

Facebook
https://www.facebook.com/animallandcreate
Using only 3 Arduino pins to control 5 matrices.
Control in total of 320 leds.
the code:
http://pastebin.com/raw.php?i=JRLCNL5N

the arduino lib:
http://playground.arduino.cc/uploads/Main/LedControl.zip

feel free to like and share this video
if you like this video please subscribe:

https://www.youtube.com/channel/UC1_tz9mcSpWdx-ektovx6GQ?sub_confirmation=1
Ребята!! Сегодня мы соберем мигалку на светодиодах! Чуть посложнее обычного блинка, но и интереснее! Понадобится arduino, 3 LED, 3 резистора 220 Ом каждый. Увидим в ардуино IDE непонятный нам пока что цикл for. Приятного просмотра!

Купить Arduino NANO на Aliexspress ----- https://goo.gl/dmxBLU $2.80
Купить Arduino UNO на Aliexspress ----- https://goo.gl/VZrciW $3.35
Купить Arduino MEGA на Aliexspress ----- https://goo.gl/HXIc65 $9.99
Купить Макетная плата на Aliexspress ----- https://goo.gl/Cr63TN $0.
It's a Arduino Nano 4x4x4 RGB Led Cube made my Charliecube site. You can find the building procedure here: http://aglick.com/charliecube.html#whatIsIt
Soundtrack is from Kenneth Thomas feat Colleen Riley - The Heart Speaks (Swab & Joey Mova Remix)
Added a few more patterns since last time. Code can be found http://chiggenwingz.com/quads/ledcode/quad_leds_v0.3.ino feel free to use and modify to your hearts content :)

You'll need to get the Adafruit Neopixel library to use this properly https://github.com/adafruit/Adafruit_NeoPixel

Basically my receiver is outputting PPM to my Naze32, but it still outputs PWM on the other pins. So I take channel 6's PWM signal and feed it into a Arduino Pro Mini (5volt version) and look for any time the signal goes a

The Arduino microprocessor is a very affordable embedded systems solution. It costs about $20 per unit, and can be program easily in C. It has easy access to digital input and output pins, as well as analog input pins. In combination with the WiShield it allows for you to control lights, motors, and more over the network as well as monitor temperature, humidity, noise, etc.

This video provides a basic demonstration of controlling three LED lights over the wifi network at my home via a web browser on t
This electronic kit can be purchased off ebay, it comes in several options:
-Main board can be populated to drive single color leds or RGB
-ARDUINO OPTION: ArduinoUno board has to purchaded separately, ships with stackable conectors
-FEZ (not supported yet)
-MSP430, the kit ships with a MSP430LP and three processors, only one of them can power the cube, MSP430-2253. the other two are shipped so the LP can be used for other proyects, or practice
-USB cable
-8 LED Drivers (depends on
https://vk.com/arduino_group

v.01 NRF24L01 if Arduino №1 button press-Arduino №2 LED on
Version 0.1 2013/07/14

на Arduino №1 нажимаем кнопку, ПОКА удерживаем кнопку нажатой,
на Arduino №2 вКлючается (горит) светодиод,

sketch скетч код №2 для приёмника
v.01 receiver NRF24L01 if Arduino №1 button press-Arduino №2 LED on
http://yadi.sk/d/ZDAQhQFB6pHM8

sketch скетч №1 код №1 для передатчика
v.01 transmitter NRF24L01 if Arduino №1 button press-Arduino №2 LED on
http://yadi.sk/d/r65DTFd86pHUQ

library скачать библиотеку
htt
Complete instructions for this episode of Weekend Projects can be found at http://makezine.com/projects/android-arduino-led-strip-lights/

Control a strip of full-color LEDs using your Android's touchscreen. Using an Android device that is compatible with USB Host Mode, you can both power and communicate with the Arduino. Build a simple driver circiut on a breadboard (no soldering required) to amplify the Arduino's output pins to provide the necessary current to the LEDs, and create your own light sho
Link to the actual circuit in the video: http://goo.gl/spd2FP
This video shows how to use an Arduino UNO to blink a LED in 123D Circuits. Anyone c...
Turn On LED Alternately (Manual Programming) – In this experiment we will try to switch led for 1 seconds using the program line manually.
http:/...
slow motion color wave - fades from the right to the left hand.
it's almost finished, only buttons will change and some code updates

Made with: adafruit 16x32 rgb led matrix, teensy 2.0++, bluesmirf gold, 5v8a UBEC, 5000mah lipo battery

CODE:
https://drive.google.com/file/d/0B5OSFdsRmWWsR2ZmdjRLcW1QeEk/view?usp=sharing
Классика программирования микроконтроллера - управление напряжением светодиода. Часть 2
Arduino МЫШЬ Поворотный ночник MOUSE PS/2 SERVO LED V.1-20160601.
Компьютерной мышкой, управляем двумя SERVO и яркостью светодиода.
Таблетка от дребезга SERVO - "сильное питание" + конденсатор.
___________.
Download - sketch Arduino MOUSE PS/2 SERVO LED V.1-20160601.
https://yadi.sk/d/vy8ryVnEsMwMb
+ sketch оставлю в комментарии - под видео.
___________.
Каркас кода для мышки взял здесь.
http://www.homofaciens.de/technics-base-circuits-computer-mouse_en_navion.htm
___________.
servo Pan/Tilt.
http://www.eba
наконец-то дошли руки до ардуины =)
This video shows how Simulink (MATLAB) can be used to model LED Brightness on an Arduino Board.
Tetris gameplay on LED game table using arduino.

Git Repo:
https://github.com/bezanis/LEDGameTable
Some more info on the project (Still in development):
http://ledgametable.bezzmedia.com/
This video shows the first prototype of my selfmade 8x8 LED matrix along with its controller. I use an Arduino Uno to display the scrolling text. The controller itself uses a M74HC595 shift register for row control and a 74HC4017 Decade Counter for column switching.
What looks like faulty scrolling in the dark sections of the video is in fact an optical illusion that results from the lowered frame rate of the camera I shot this little clip with. The display scrolls smoothly and without glitches (as you can
You can find code and explanation here

https://duevoltezero.wordpress.com/kitt-knight-rider-scanner/

I was looking for a good sketch that mimics the famous led scanner of KITT. But i was unable to find a good one. So i decided to do by myself.. and here it is.. i think it's pretty similar to the original. It took me some time to figure out how to do, it was more difficult that i expected. Certainly the sketch could be perfectioned but i have not much time to work on..
Using the tm1638 based led and key module
This video is a tutorial for the led and key module
the code: http://pastebin.com/raw/KRZycZAs
feel free to like and share this video
if you like this video please subscribe:

https://www.youtube.com/channel/UC1_tz9mcSpWdx-ektovx6GQ?sub_confirmation=1

To support my videos check out my patreon page:
https://www.patreon.com/marco_arduino
This is construction and demostration video of my interactive LED table based on Arduino Mega. LED display was constructed from pegboard, white glass plate, aluminium profiles and 100 pieces of RGB WS2812B addressable leds.
Remote controller was fully printed on 3D printer and is based on Arduino Pro Mini. Wireless communication between table and controller is based on HC-05 bluetooth modules.

Main menu of this table is divided into 9 sections:
1. Rainbow animation
2. Animations from Fastled library
3. St

Подключение светодиодной матрицы 8х8 к Arduino через MAX7219 (MAX7221) - подробнейшая инструкция для детей от Алёны Кузнецовой. Обучающее видео по Ардуино.
http://howtomechatronics.com/projects/diy-led-heart-photo-frame-arduino-project/► You can find more details, circuit schematics and source codes on my official website.

In this video I will show you how you can make this awesome led heart photo frame using Arduino. At first glance it looks like an ordinary photo frame but once you click the switch on the back side it turns into extraordinary photo frame. Building this Arduino Project is very fun and it can be a perfect Valentine, Birthday or Anniversary pr
This is my hand made 8x8x8 LED Cube. It has an Arduino UNO for its brains, has 512 diffused blue LEDs, uses 8 74HC595 shift registers, 8 TIP 122 transistors, 64 100ohm resistors, and some capacitors. I made it all plugable so I can switch out parts or update parts later. It is powered from a 5v 2amp power supply from adafruit.com. I hand made the cube, the circuitry, box, and case. It cost me about $70 USD and took a long time to make. Feel free to ask questions or leave comments. The code is from Lia
POV color LED display built from LEGO and controlled by Arduino
Completion of a project. Two 24" x 26" boards (pegboard) filled with 818 blue LEDs, 160 IR emitters, and 190 IR receivers. All organized into 190 "nodes" and powered by two Arduino micro-controllers. I built the coffee table and sized the inner cabinet to accommodate these pegboard reactive surfaces.

The two pieces of pegboard (as well as a good view of the wire "nest" beneath them) can be seen being tested here: http://youtu.be/ZO-9DszzpI8

The original prototype board can be seen here: http://youtu.be/o
Готовил мет, когда проснулся увидел это 👮😆
Решил поморгать пятью метрами светодиодов, если датчик расстояния покажет меньше 15см.
This year I decided to do a 7' Christmas tree lit up by the popular Neopixel (ws2811). I've used Peter Chestna's source code to get me up and running (I've sped up his code to make the demo a bit shorter). I'm using an Arduino Nano 328 to drive the LEDs. There are total of 400 LEDs on the tree. The LEDs are not supposed to be in sync with the music, yet.....

Peter's Source (you will need the FastLED library):
http://pastebin.com/Qe0Jttme

FastLED Library:
https://github.com/FastLED/FastLED

Lights purchase
QCoo /kjuː kuː/ is the world’s first high-tech gadget that merges new tech with old game, using Bluetooth connectivity to bring you a portable game solution (6oz) that lightens your day.

For more details, we are on Kickstarter: http://bit.ly/getqcoo

Follow us on Face book: https://m.facebook.com/QCoocube/?ref=bookmarks

Also subscribe to our newsletter: http://www.getqcoo.co
Модуль точечного LED дисплея 8x8 на базе MAX7219 для Arduino в режиме тестирования.
Code and Instructions: https://github.com/mtbnunu/arduino-tetris
Первый проект на Ардуино
In this brief demo, we show how Windows Remote Arduino allows a Windows 10 device, in this case a PC, to control an Arduino remotely. Watch as a UWP app using the Windows Remote Arduino library toggles LEDs on the Arduino. For this particular sample, we make use of the pre-built Windows Remote Arduino Experience application.

To see a Hackster post with a similar project, visit: https://www.hackster.io/windowsiot/basic-windows-remote-arduino-47eeb9.

To get started with Windows Remote Arduino, follow the
Долго, сложно, но готово.
P.S программировать сдвиговые регистры слооожно.
Get some LEDs, a couple of touch sensors, connect it to your Arduino and have fun.
прога написана на асемблере в 2014г . Как именно работает уже не помню. Точно делал стабилизацию, поиском перехода сигнала через ноль. И рисовку непрерывной кривой через точки считанного сигнала.
ATmega8 + LED Numerical Indicator. Used ARDUINO IDE to chip programming.
Using MaxMSP to drive four 2416 LED Panels at frame rates up to 24 fps.
1536 LEDs controlled by one Arduino

Arudino set at 115,200 baud. Pulls about 9 to 10 watts of 9v power through the three 7805s which power the board and the arduino.

* When project completed, the edge between the panel will be seamless.

This video explains how to use the 16 channel PWM controller TLC5940
The CODE!!
http://www.kevindarrah.com/download/arduino_code/TimersCountersV6.ino
BUG FOUND - HERE IS THE NEW CODE
http://www.kevindarrah.com/download/arduino_code/TimersCountersV7.ino
Fixed the Bitwise Operation to set pins LOW.

Sorry, No Schematic Yet

The part from sparkfun:
https://www.sparkfun.com/products/10136

Светодиодный куб 3x3x3 под управлением микроконтроллера Arduino.

arduino+LEDstream+ambiBox+LED strip WS2801

A better video demo of our arduino led table project...
Using Blender to send serial commands to an Arduino to light an RGB LED strip.
more info here - http://funkboxing.com/wordpress/?p=1308
*I didn't realize I posted sound with this file - FYI - it's Eureka - Season 2 Episode 10.


Управление RGB-светодиодом с помощью кнопок.
http://compblog.vlukyanov.com/?p=313

Светодиодный куб 3х3х3 под управлением Arduino
Подробнее: http://blog.savinyurii.ru/LEDcube

https://vk.com/arduino_mega_2560_r3_rev3_kupit

Arduino (MEGA 2560) Introduction on Physical Interfaces & LEDs
Full length : 00:04:08

Part 1: Interfaces (PINs, I/O) (PWM, Communication, Digital, Analog IN, Power)
Part 2: LEDs (ON, L, Tx, Rx)
PC Tech Show Arduino (MEGA 2560) - Introduction on Physical Interfaces & LEDs
Provided by PC Tech Show, http://pctechshow.weebly.com/
Check out my latest project, a sound meter!
https://www.youtube.com/watch?v=MOhAtQn9kW8&feature=youtu.be

Here's the link to the video of the working cube:
http://www.youtube.com/watch?v=QBONPlhAD_E

The code was too long to fit here in the description so I uploaded it here:
http://ge.tt/80Cp5aX/v/0 .

I've never used this site before so let me know if you can access it. Any way, leave comments/questions about the video below! Happy building!
____________ https://vk.com/processing_pro __________

____________ https://vk.com/freeduino ___________
Монитор 19 дюймов, 1366x768
4 куска светодиодной ленты в общей сложности 38 диодов
Arduino NANO и блок питания 5В 3А
Лабораторные работы по Arduino для студентов ВУЗов и всех желающих узнать, что такое Arduino и как просто начать с ним работать... Все примеры выполняются (пока, для начала) в программе эмуляторе Virtualbreadboard (www.virtualbreadboard.com). Надеюсь уроки будут вам интересны. В случае положительных отзывов постараюсь в дальнейшем начать снимать и выкладывать интересные проекты с реальным Arduino и компонентами. Благодарю за внимание!
Игра "жизнь" с регулировкой скорости смены поколений.

The game "life" with adjustment of speed of generational change.

Iteaduino,
LED matrix 8*8 (green),
2 shift registers 74HC595,
variable resistor,
8 500-ohm resistors,
jumpers.

I transferred my 4x4x4 LED cube from the breadboard to a soldered circuit board along with a barebones Arduino, 4 Transistors, 20 resistors, and of course 64 LEDs. I painted everything black. Very Goth looking. check it out after I turn on the desk lamp.
Open Source arduino nano powered infinity mirror LED clock. LED strip light is housed in a cnc'ed case.
UPDATE: I have updated my code and CAD files on Sourceforge for all to use and modify
http://sourceforge.net/projects/riseandshineledclock/
Please visit my website http://www.barkengmad.com if you would like to buy one of these clock and to see my other projects. I currently make them to order.
ПОЛУЧИЛОСЬ !!!!!!!
This is the 3x3x3 LED Cube I prototyped off the bread board in an earlier video (See link). Now it's all soldered together. Again, built while following the "LED Cube and Arduino Lib" tutorial on Instructables. Built as part of a class, "Electronics for Art and Design."

LINKS:
Part of the larger Project, Keyboard-Cube:
http://www.brionwolf.com/interaction-design/keyboard-cube
Created using the Instructable by GZip:
http://www.instructables.com/id/LED-Cube-and-Arduino-Lib/